PT-6000 Video Web Inspection System

I. System Overview
This series of products is designed for various label printing industries and narrow-format printing industries. It can freeze the image quality of high-speed printing online on the display screen, facilitating the adjustment of printing processes and parameters as well as the monitoring of printing quality by operators. This system is usually used to monitor the printing registration cross marks or to magnify and monitor important logo areas.
II. System Features
It adopts a high-speed area-array CMOS chip and a professional motorized lens, with 10x optical zoom, a super large aperture, high image resolution, clear captured images, and excellent color reproduction.
It is equipped with a large-screen high-definition liquid crystal display, which provides higher image clarity.
By selecting high-performance hardware and matching with unique image digitization technology, it provides the following characteristic functions:
The function of freezing the captured image allows for easier analysis of printing quality at any time.
The captured image adjustment function enables the adjustment of the position to be monitored in real-time, including front, back, left, and right directions.
Automatic detection can capture the printing surface automatically in different ways according to requirements.
The autofocus function makes it more convenient to zoom in and out of the image.
The system control line uses professional cables and high-quality drag chains, which are resistant to bending and have a long service life.
It can support external synchronous triggering by encoders, proximity switches, gear sensors, etc., and is easy to install.
With the optimized design of the optical reflector and a high-grade material diffuser plate, the exposure is uniform and soft, and the brightness is high.
III. Performance Indicators
Applicable power supply: 220V±10%, 50Hz;
Applicable ambient temperature: 0-40℃;
Applicable monitoring speed: up to 1200 meters per minute;
Camera: CMOS chip digital camera with 2 million pixels;
Lens: 10x optical zoom technology, with step focusing and good self-learning ability;
Image magnification: approximately 25 times;
Monitoring range: minimum 17×13mm, maximum 113×94mm;
Image capture mode: two capture modes, automatic and manual;
Working mode: stop, manual, horizontal inspection, horizontal equidistant, vertical equidistant, row-by-row inspection, column-by-column inspection;
Horizontal movement speed: less than 6 meters per minute;
Image synchronization mode: gear sensor, proximity switch, encoder, etc. The gear number setting range is 1-9999;
Synchronous signal frequency range: it can detect pulse signals up to 30kHz at most;
Display: 21.5-inch VA display with a wide viewing angle, and a telescopic bracket is optional;
Dimensions (length×width×height) of the camera unit: 140mm×100mm×280mm.