PT-L01A LED Stroboscope

1. PT - L01A LED stroboscope is my company with domestic and foreign advanced technology research and development of a new generation of strobe, adopt efficient energy control chip control energy output, makes the energy output is more stable, high brightness and low calorific value; High performance single chip microcomputer processing unit, special display chip drive digital tube display, high frequency accuracy; Adopt the import rotary encoder fast frequency modulation, the built-in high performance lithium battery, the quality is lighter; It does not need AC220V ac power supply, dissolves the trouble caused by the power cord to the operation, can carry on any carry on the observation, use more convenient. A sufficient charge can meet the requirement of single shift production, and the continuous working time is about 4 hours (the specific time is related to the frequency of flash).

2. This stroboscope is especially suitable for situations where the power is not convenient, the voltage is unstable or there is water vapor and other explosion-proof requirements.

1. Power supply: DC 12V 3A.

2. Charger power supply: AC100V~240V 50~60Hz;

3. Display: 5 digital tube display;

4. Stroboscopic accuracy:±0.1%

5. Trigger frequency range: internal continuous adjustment from 50-36,000 r/min, adjusting accuracy 0.1 r/min;

6. Phase delay: the phase delay function can be adjusted for 0~359^oand adjust the accuracy of 1^owith the external trigger source.

7. Frequency flash interval: the adjustable frequency flash interval is 8-100 microseconds (accurate to +/-1 microsecond);

When the frequency is increased to 1/50, the internal software will limit the stroboscopic time.

8. External trigger sensor type: photoelectric switch, hall switch (PNP normally open), proximity switch (PNP normally open), encoder signal;

9. External trigger signal requirements: low level 0~0.7V, high level > 2.7V (maximum allowable 24V), rising edge triggered, high level duration > 20 us;

10. External trigger sensor power supply: DC12V 50mA (provided by stroboscope);

11. Overall dimensions (length x width x height) : 240mm x 120mm x 150mm.

1. Multiple trigger modes: internal trigger and external trigger, the external trigger mode can realize the effect of automatic tracking;

2. The automatic tracking function of the pattern can be realized when the working mode is triggered externally (using the photoelectric signal);

3. Built-in memory, with flash frequency and internal parameter automatic memory function, to facilitate the next use;

4. Adopt the import encoder, cooperate with the simple operation software, the knob adjustment is more rapid, accurate, practical, easy to use, handy;

5. The software has the function of frequency flashing phase Angle adjustment;

6. The frequency unit Hz and f/m can be selected for different use occasions;

7. Adopt imported high-power LED, built-in high-performance power module to improve the flash brightness and work reliability;

8. Latest products, stable performance, long use time, very few faults;

9. The software has two tracking programs, which can automatically track the printed surface of the unfixed color mark.

10. New power design, lithium battery power supply, more durable;

11. High luminous efficiency and even more uniform lighting.