Fixed stroboscope

1.1 PN-02C series stroboscope is one multi-joint fixed stroboscope researched and developed by our company. It adopts high-performance chips as the core processing unit, dedicated display chip driver digital tube, equipped with real-time operation system. The digital tube display the flash times per minutes and working conditions at real time.

1.2 The multi-lamps of this series stroboscope can flash at the same time, also one of the lamps flashes. The lighting width is 200mm to 1500mm. We also can provide custom-made model according to the buyer’s required lighting area.

1.3 Well-designed installation accessories is also supplied with the strobosocops.

1.4 It is used in the high-speed printing machine, inspection machine, bronzing machine, slitting machine and rewinding machine. 

1. Sensor power supply: AC220V, 2A, 50Hz; AC110V, 2A, 50Hz.
2. Display: 5 digitals LED display
3. Stroboscopic accuracy: ±0.1%
4. Working mode: internal & external triggers
5. Frequency range: 50-5000f/min
6. External trigger function: support phase (lag angel) control
7. Input mode of external trigger: sensor, Hall switch, proximity switch
8. External output mode: PNP normally open
9. External trigger input signal: pulse input
10. Single working hours: can be set by function key
11. Cable length: 3M

3.1 Fast change between internal trigger/external trigger, twice the frequency, half the frequency can be adjusted quickly;

3.2 External trigger working mode ( by photoelectric signal), can track the patterns automatically;

3.3 Built-in memory, with automatic memory function of flash frequency and internal parameters, make the next operation convenient.

3.4 Adopt the advanced encoder, with the professional operation software, knobs adjustment.

3.5 With the function of automatic flash stop, can save the electricity, and extend the life of the tube.

3.6 The tube is made in German.