Motor Stroboscope

PN-07C motor speed stroboscope is mainly for high-speed non-destructive testing, our accuracy is 1%, the max. can be 24000f/min. This stroboscope is mainly used to test the speed of micro-motor, textile spindles and small electric tools. It is one non-contact speed tester.

1. Power supply: AC220V±10%, 2A, 50Hz, or AC110V±10%, 2A, 50Hz,
2. Display: 5 digitals LED display
3. Stroboscopic accuracy: ±0.1%
4. Working mode: internal & external triggers
5. Internal trigger frequency: (50-12000)f/min
6. Limited frequency: 12000f/min
7. External trigger frequency: 50-12000f/min
8. External trigger function: support phase (lag angel) control
9. Input mode of external trigger: sensor, Hall switch, proximity switch
10. External output mode: PNP normally open
11. External trigger input signal: pulse input
12. Highest permit 24V
13. External trigger power output: DC12V, 50mA (provided by stroboscope)
14. Single working hours: can be set by function key
15. Single flash energy: 0.13J @ 1000f/m   0.04 J @ 4000f/m
16. Ambient light: less 10000 Lux
17. Spot: Φ300mm circle @ 500mm
18. Illumination LUX: 850 lux @ 500mm 4000f/m
19. Power line length: 3M
20. Outer dimension: 220*120*130mm
21. Weight: about 1.2kg

1. Fast change between internal trigger/external trigger, twice the frequency, half the frequency can be adjusted quickly;

2. External trigger working mode ( by photoelectric signal), can track the patterns automatically;

3. Built-in memory, with automatic memory function of flash frequency and internal parameters, make the next operation convenient.

4. Adopt the advanced encoder, with the professional operation software, knobs adjustment.

5. With the function of automatic flash stop, can save the electricity, and extend the life of the tube.

6. The tube is made in German.